

High-Strength Low Alloy (HSLA):
Docol® 420–500LA, 0.80–3.00 mm
Dual Phase (DP):
Docol® 500–1180DP, 0.80–2.00 mm
Martensitic (M):
Docol® 1100–1700M, 0.80–2.00 mm
Electrogalvanized Dual Phase (DP) and Martensitic (M), 7.5 micron zinc layer double sided:
Docol® 1000DP-EG Docol® 1200–1400M-EG, 0.80–2.00 mm
Roll-forming:
Docol® Roll 800–1000, 0.80–2.00 mm
Annealed Boron:
Docol® PHS 1500, 1.00–3.00 mm
High-Strength Low Alloy (HSLA) acc. to VDA:
Docol® 420LA-GI40/40, 0.80–2.00 mm
High-Strength Low Alloy (HSLA) acc. to EN:
HX500LAD +Z100, 0.80–2.00 mm
High-Strength Low Alloy (HSLA) acc. to VDA:
Docol® HR 550-700LA-GI40/40, 2.00–2.50 mm
Dual Phase (DP) acc. to VDA:
Docol® 490–980DP-GI40/40, 0.80–2.00 mm
Dual Phase (DP) acc. to EN:
Docol® 800–1000DPX+Z100
Complex Phase (CP) acc. to VDA:
Docol® 780–980CP-GI40/40
High-Strength Low Alloy (HSLA):
Docol® HR 700LA, 2.00–3.00 mm
High Edge Ductility (HE):
Docol® HR 355HE, Docol® HR 420HE, Docol® HR 460HE, Docol® HR 500HE, 2.00–4.00 mm
Complex Phase (CP):
Docol® HR 800CP, 2.00–4.00 mm
Martensitic:
Docol® HR 1200M, 2.00–2.50 mm
Annealed Boron:
Docol® PHS HR 1500, 4.00 mm
Besides zink coating from our trial material stock, SSAB can offer Galvannealed and Galfan upon request. We also offer a variety of dimensions for tubes made of advanced high strength steel.
For more information please contact your Docol® automotive steel expert.
New samples are constantly being added to the stock. Our technical specialists can help you decide which steel grade and thickness should be used in a specific application. We can then supply the trial material and, hopefully, the final material when your applications are ready for serial production.
Please contact your local SSAB representative to place your order.